If you cut steel then you need Cutting Schedule
to cut waste.
This programme is now widely used by a major plc Steel Stockholding
company and at least two other steel stockholders in the UK. Plus
a number of steel fabricators. |
Probably the easiest programme you will ever use.
Requires no training.
Just: |
 | Enter a cutting list |
| Enter the stock available or load a previous
stock profile |
| Enter options for saw blade thickness, waste
factor... |
| Click calculate and you will be presented
with an optimised cutting list and stock material requirement |
| Choose from options 1,2,3 for possible
different cutting combinations which may be more beneficial and view
the output. |
| Choose Best fit to have the programme try to
use the least stock. |
| Choose print and optionally printout an
order, cutting list, cutting schedule or statistics.
This programme is almost guaranteed to pay for itself the first time
it is used.
The cost...? About 6m of 82Kg/m section Not to mention the time you
will save!
To download a working demo of Cutting Schedule
click here
|
|
Example: Try this manually or on your current system |
Cutting List:
6 @ 3300, 8 @ 2935, 8 @ 2535, 8 @ 2515, 2 @ 1680, 3 @ 1150, 8 @ 850, 16
@ 800
For stock 8m, 9.5m, 11m and
12.2m bars were available.
|
Cutting list produced for your sawer:
From 1 bars @ 9500 ( Remainder = 350
) cut:
1 @ 1150
10 @ 800
--------------------------------------------------------------------------
From 1 bars @ 8000 ( Remainder = 65 ) cut:
1 @ 3300
1 @ 2935
2 @ 850
--------------------------------------------------------------------------
From 2 bars @ 8000 ( Remainder = 85 ) cut:
1 @ 3300
1 @ 2935
1 @ 1680
--------------------------------------------------------------------------
From 1 bars @ 8000 ( Remainder = 50 ) cut:
2 @ 1150
1 @ 850
6 @ 800
--------------------------------------------------------------------------
From 1 bars @ 12200 ( Remainder = 95 ) cut:
1 @ 3300
3 @ 2935
--------------------------------------------------------------------------
From 2 bars @ 12200 ( Remainder = 65 ) cut:
1 @ 3300
1 @ 2935
1 @ 2535
1 @ 2515
1 @ 850
--------------------------------------------------------------------------
From 3 bars @ 11000 ( Remainder = 50 ) cut:
2 @ 2535
2 @ 2515
1 @ 850
--------------------------------------------------------------------------
|
Overall waste factor 0.91%
Why not print this page and see if you can do better from the available
stock! |
